
12 V Dynamixel, official AX-12A successor; at the 2026 US price it is near Feetech territory.
Verdict. Faster and better-supported than STS3215 at similar size; buy if you value Dynamixel firmware/ROS tooling and can get stock.
| Torque | 1.5 N·m stall @12 V |
|---|---|
| Speed | ~57 rpm no-load |
| Encoder | 12-bit contactless |
| Bus | TTL, Protocol 2.0 |
| Weight | 57 g |
| ROBOTIS US | €30.8 | USD 27.5+VAT | list price read 2026-11 (was ~$50 earlier) |
Recommended on r/robotics as the AX-12A replacement; builders note it is faster than ST3215 and quadrupeds swap to ST3215 to cut cost.
“the ST3215 is heavily geared for torque, so the no-load speed is way below the XL430.” — Reddit r/robotics, 2026-09
“the current version is rather pricey at 700-800 euros because it uses 12 of the DYNAMIXEL XL430-W250-T servos. The next design, with roughly 300-400 euros using 12 of the ST-3215-C018” — Reddit r/ROS, 2026-09