
SPI CAN controller + 5 V transceiver; adds CAN to MCUs without one (RP2040, AVR, Raspberry Pi).
Verdict. Only when the MCU lacks CAN; the 5 V TJA1050 needs care with 3.3 V MCUs, and the MCP2515 drops frames at high load. MCP2518FD for CAN FD.
| Controller | MCP2515 (CAN 2.0B) |
|---|---|
| Transceiver | TJA1050 (5 V) |
| Crystal | 8 MHz typical |
| Interface | SPI |
| Rate | up to 1 Mbps (500k realistic) |
| LaskaKit | €1.81 | CZK 44.2 | incl. VAT· from shop listing |
Works for light traffic; experienced users warn of dropped frames under Linux at real bus loads.
“you are pretty much guaranteed to drop some percentage of incoming messages at realistic bitrates. All the boards use MCP2515 SPI CAN controllers” — HN, 2020-09