Makerbase MKS SERVO42D closed-loop NEMA17 driver
Motors· Steppers & drivers

Makerbase MKS SERVO42D closed-loop NEMA17 driver

Makerbase released 2023 current buy mid

Driver board that bolts on the back of a NEMA17: magnetic encoder, FOC, step/dir plus RS485 or CAN.

Verdict. Cheapest way to get no-lost-step steppers with a documented CAN/RS485 protocol for arms and CNC.

Specs

Controlopen/closed loop, FOC; 6 modes
InterfacesSTEP/DIR/EN, RS485 (Modbus) or CAN
Microstep1-256
Max speed3000 rpm
Encodermagnetic, on-board

Prices

AliExpress€19.3board only; CAN or RS485 variant; discounted from €38.58; card price = cheapest variant, incl. VAT· from search results
  • Turns any NEMA17 into a servo-like axis
  • CAN/RS485 daisy chain with documented protocol
  • Runs cooler (current on demand)
  • Adds length behind the motor
  • Firmware/config learning curve
  • Incremental only (homing needed)

What people say liked

r/hobbycnc and r/embedded like it as a cheap, documented CAN stepper; robot-arm builders use it with plain NEMA17s.

“I got a CANbus stepper SERVO42D which can be bought as RS485 or CAN (plus normal stepper signals). The protocol is documented and works as advertised.” — Reddit r/embedded, 2026-05
“look in to upgrading the existing ones with MKS Servo42D, since those will make the existing steppers run harder when needed and cooler when not needed.” — Reddit r/hobbycnc, 2026-09