USB-UART adapter (CP2102 / CH343, with DTR)
Tools· Debug & programming

USB-UART adapter (CP2102 / CH343, with DTR)

generic (Silabs / WCH) released 2015 current buy budget

3.3/5 V USB-serial adapter with DTR/RTS for flashing boards without USB (WT32-ETH01, ESP-01, bare modules) and console logs.

Verdict. Every bench needs one; get a CP2102 or CH343 with DTR/RTS so esptool can auto-reset.

Specs

ChipCP2102 (or CH343/CH340)
Levels3.3 V / 5 V jumper
PinsTX, RX, DTR, RTS, 3V3, 5V, GND
Max baud~1-3 Mbps (CH343 6 Mbps)

Prices

AliExpress€2.15CP2102 module· from search results
LaskaKit€2.93CZK 71.86-pin with DTR, incl. VAT· from shop listing
  • Cheap
  • Driverless on Linux/macOS
  • Auto-reset with DTR/RTS
  • Fake CP2102s exist
  • 3.3 V regulator weak on some boards

What people say liked

Commodity part; HN prefers CP210x/CH34x over old FTDI because of FTDI's fake-bricking history.

“USB-TTL breakout (with female USB-C connector) is $1.40 - even for nice CP2102 with unique serial number.” — HN, 2026-05
“I recently used CH340N (soic 8 virtual com port) and it was really easy... works out of the box on Linux.” — HN, 2024-06