WS2815 12 V strip with backup data line
LEDs· Addressable LEDs

WS2815 12 V strip with backup data line

Worldsemi released 2018 current buy budget

12 V per-LED addressable strip with a backup data (BI) line so a dead pixel doesn't kill the rest.

Verdict. Best per-LED addressable strip for runs of 5 m+ (eaves, shelves); 12 V cuts current and injection points by ~2.4x.

Specs

Voltage12 V
DataDI + BI (backup)
Pixel1 LED = 1 pixel
Densities30/60/144 LED/m

Prices

AliExpress€3.69listing covers DC12V WS2815 and 5 V WS2812B variants; cheapest shown· from search results
  • Less voltage drop than 5 V
  • Survives single-pixel failures
  • Per-LED resolution, unlike WS2811 12 V
  • Higher idle draw (~1 mA/LED even when off); tie first pixel BI to GND
  • Needs 12 V PSU plus 5 V/3.3 V for the MCU
  • Some 'WS2815' strips are relabelled

What people say loved

WLED users like it for permanent outdoor installs.

“On the first pixel, tie the backup input (often marked BI) to ground, otherwise the first pixel can flicker or not light at all.” — Reddit r/WLED, 2026-10
“It has a "backup data wire" that allows a single failed LED unit to be bypassed.” — HN, 2023-12
“I'm a huge fan of WLED. It tends to work flawlessly after some minor tweaking of settings, at least on my ESP8266 board with WS2815 LED strips.” — HN, 2022-01